Straight Desk Disposal Disassembly - tayco Metro Installation Manual

straight desk disposal disassembly

1. Pull out the plastic grommets
, Figure 1 and place them in the
recycle bin containing plastic
materials.
2. Detach the laminate straight
surface by removing the
screws holding it in place.
Place the laminate straight
surface in the waste bin.
3. Remove the wooden dowels
of the laminate end gables and
place them in the recycle bin
containing wooden materials.
4. Detach the 90° steel brackets
of the laminate end gables
removing the screws
2. Place the 90° steel brackets
and screws in the recycle bin
containing steel materials.
5. Detach the laminate end gables
by removing the screws
holding them in place. Place the
laminate end gables in the waste
bin and the screws in the recycle
bin containing steel materials.
Continued on the next page >>
July 2023
by
, Figure
Drill
Robertson # 2
Figure 1
Figure 2
tools & hardware needed
metro 78