Overhead Storage Attachment To Dry Wall With Wood Studs - tayco Metro Installation Manual

overhead storage - attachment
to back connector
1. Find the location of the studs with
a stud finder; make marks on the
wall.
2. Mark the location of the back
connector on the wall and position
it to the previously marked studs.
The recommended height is
50-inches from the floor to the
bottom of the back connector.
Use the following size as a guide
for mounting the back connectors
on the wall listed in Figure 1.
3. Level the back connector and
attach it to studs with the
appropriate anchors/fasteners for
the wall/studs. It is advised to
keep the two 1-1/2 inch space
free of screws/holes to secure the
overhead storage unit properly
(Figure 2).
July 2023
FIGURE 1
STORAGE CONNECTOR
WIDTH WIDTH
30" 27.75"
36" 33.75"
42" 39.75"
48" 45.75"
54" 51.75"
60" 57.75"
66" 63.75"
72" 69.75"
FIGURE 2
WALL
WALL STUD
STORAGE
BACK
CONNECTOR
2"
1.5"
7.16"
1.5"
3.1"
KEEP CLEAR
USE THE APPROPRIATE
ANCHORS/FASTERNERS
DEPENDING ON THE
WALL/STUD MATERIAL
metro 71