Table of Contents
Advertisement
en Basic settings
13 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
13.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Basic settings Selection
Language
Selecting language
Home Connect Implement settings for Home Con-
nect and connect appliances.
Appliance information
Wi-Fi
Off
On
Clock
Set the current time
Audible signal
Short cooking time
Medium cooking time
Long cooking time
Button tone
Switched off
Switched on
Display bright-
Display brightness is adjustable in
ness
five stages
Time
Displays
Do not display
Lighting during
Off
1
operation
On
Childproof
Button lock only
lock
Door lock + button lock
Deactivated
Elapsed cook-
Do not display
ing time
From start
After heating up
1
Night-time dim-
Off
ming
On (display dimmed between 22:00
and 05:59)
Factory setting (may vary according to model)
1
14 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tips
¡ Please consult the documents supplied by
Home Connect.
¡ Please also follow the instructions in the Home Con-
nect app.
18
1
1
1
1
1
Basic settings Selection
Start-up anima-
Do not display
tion
Displays
Fan run-on
Minimum
time
Medium
Recommended
Long
Pull-out system Not retrofitted (if shelf supports and
a single set of pull-out rails are
1
fitted)
Retrofitted (if two or three sets of
pull-out rails are fitted)
Sabbath mode Do not display
Displays
1
Dishes
All
Kosher only
No pork
Factory set-
Yes (reset)
tings
No
1
Factory setting (may vary according to model)
13.2 Changing basic settings
Requirement: The appliance is switched off.
Press and hold the button for approx.
1.
three seconds.
a The first basic setting is shown in the display.
Use the function selector to switch to the next or
2.
previous basic setting.
To save the changes, press and hold the button
3.
for approx. three seconds.
13.3 Discarding changes to the basic
settings
Touch the button.
▶
a All changes are discarded and not saved.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→ "Safety", Page 2
¡ Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡ In networked standby mode, the appliance requires
a maximum of 2 W.
1
1
1
Advertisement
Table of Contents
