Fontana Showers FS111801B Installation Instructions Manual

Matte black wall mount square shower head with 2-way concealed thermostatic mixer shower set with handheld shower

Advertisement

MATTE BLACK WALL MOUNT SQUARE SHOWER HEAD WITH
2-WAY CONCEALED THERMOSTATIC MIXER SHOWER SET WITH
HANDHELD SHOWER INSTALLATION INSTRUCTIONS

PRIOR TO INSTALLATION

Please read installation instructions below. All plumbing should be
installed in accordance with applicable building codes and regulations.
Unpack and inspect the items for any shipping damages. If you find
damages, do not install.
All products must be installed by a professional and certified plumber
otherwise warranty may be voided.

POSSIBLE TOOLS REQUIRED*

Plumbers Tape
Thread Sealant
FontanaShowers
FontanaShowers
FontanaShowers
FontanaShowers
Tape Measure
Drill
Level
Adjustable Wrench
Pencil or Marker
©
©
Product code: FS111801B
Hex Wrench
Screwdriver
fontanashowers.com
Customer Service: 800-684-4489
*not included

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FS111801B and is the answer not in the manual?

Questions and answers

Summary of Contents for Fontana Showers FS111801B

  • Page 1 FontanaShowers FontanaShowers © © Product code: FS111801B MATTE BLACK WALL MOUNT SQUARE SHOWER HEAD WITH 2-WAY CONCEALED THERMOSTATIC MIXER SHOWER SET WITH HANDHELD SHOWER INSTALLATION INSTRUCTIONS PRIOR TO INSTALLATION Please read installation instructions below. All plumbing should be installed in accordance with applicable building codes and regulations.
  • Page 2 FontanaShowers FontanaShowers © © Wall Mount Shower Installations Instructions Step 1: Step 2: Step 3: Step 4: Step 5: Step 6: fontanashowers.com FontanaShowers FontanaShowers Customer Service: 800-684-4489...
  • Page 3 FontanaShowers FontanaShowers © © Step 7: Product shown is only for installation display purpose 1. Apply plumber's tape to the threads on both ends of the shower arm and slide on the decorative escutcheon. 2. Insert the new arm into the fitting in the Wall and twist to tighten. Finish tightening with your adjustable wrench.
  • Page 4 FontanaShowers FontanaShowers © © Hand Shower Installations Instruction Step 1: Step 2: 0.19” (4.8mm) Max 1. SUPPLY ELBOW INSTALLATION Apply plumber tape to threaded ends of 1/2" (13 mm) 2. Mark the place for drilling the hole for the lower iron pipe nipple (not supplied) and thread into post.
  • Page 5 FontanaShowers FontanaShowers © © Step 4: 5. Slide the slide mechanism (1) and elbow (2) onto the wall bar (3). Slide wall bar over bracket tabs (4) and secure the wall bar unit with screws (5) provided. Install caps (6) into ends of wallbar. Lower elbow (7) &...
  • Page 6 FontanaShowers FontanaShowers © © Mixer Installations Instructions Step 1 Step 2 Function 1 Function 2 Step 3 Step 4 Step 5 Step 6 fontanashowers.com FontanaShowers FontanaShowers Customer Service: 800-684-4489...
  • Page 7 FontanaShowers FontanaShowers © © Step 7 Step 8 (8a) (8b) (8c) • According to the basic picture of the product, refer to the above picture, open the wall to dig the main body embedded port, the hot and cold water inlet, and the mixed water outlet.
  • Page 8 FontanaShowers FontanaShowers © © General Information All products manufactured and supplied by Fontana are safe and comply to legislative requirements. Providing they are installed correctly and receive regular maintenance in accordance with these instructions your user experience will not be affected. Care &...

Table of Contents