Related Manuals for ASEPT 10975
Summary of Contents for ASEPT 10975
- Page 1 TOUCHLESS UNI DISPENSERS MODEL UNI-2 User Manual 10975 (ketchup) 10976 (mayonnaise) 10977 (mustard)
- Page 2 UNI Dispensers Complete Pump 9849 Natural Dome 7299 Pump Housing 13.5mm 9718 Dome Clip 7868 Nozzle 8651 Valve 9683 Brush 7615 Safety According to food and safety regulations, most foods must be stored and/or served at certain temperatures or they could become hazardous.
- Page 3 Safety cont. • Intended for use between 50 -100 degrees Fahrenheit. • Dispenser must be used on a horizontal surface. • Dispenser must be installed in a location where it can be overseen by trained personnel. • Dispenser must be used with provided power supply. •...
- Page 4 Assembly Mount the nozzle onto the end of the pump housing. Bend the outer portion of the nozzle inside out. Insert into opening. Tab of nozzle faces towards housing. Flip the outer portion of the nozzle over the end of tube. Insert dome into the pump housing.
- Page 5 Insert valve into the bottom of the pump housing. Wrap the flaps on the side of valve onto the pair of pegs on the pump housing. TIP: Lubricate parts with clean water to ease fitting. Connect pump to pouch Put new pouch on counter top with fitment facing up.
- Page 6 Insert pouch and pump into the dispenser shroud. Hold end of pouch up while guiding the pump into the slots inside the front of dispenser. Insert the Dispensing Mechanism Make sure pump is in place. Slide the dispensing mechanism into the shroud making sure that the unit sits in place correctly.
- Page 7 Tips & Troubleshooting Product not dispensing? Make sure dome is primed properly. Make sure lid is seated properly. Activate the safety switch. Prevent leaks: Ensure that dome is pushed fully into pump housing. Ensure that you hear a CLICK when attaching pump to pouch.
- Page 8 Place product label in slot, making sure to align sensor hole. Attach the clear cover. Align tab and slot, and slide into place. ASEPT General Warranty Liability for defects Should the products, as delivered, within one proper use of the product. The Supplier’s liability...
Need help?
Do you have a question about the 10975 and is the answer not in the manual?
Questions and answers