Download Print this page

ASEPT nemco SS6L-1 User Manual

Stainless steel dispensers

Advertisement

Quick Links

StainleSS Steel
DiSpenSerS
User Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the nemco SS6L-1 and is the answer not in the manual?

Questions and answers

Summary of Contents for ASEPT nemco SS6L-1

  • Page 1 StainleSS Steel DiSpenSerS User Manual...
  • Page 2 Stainless Steel Dispensers Model Part # Model Part # Single SS6L-1 10961 Single Drop In SS6L-1DI 10966 Double SS6L-2 10962 Double Drop In SS6L-2DI 10967 Triple SS6L-3 10963 Triple Drop In SS6L-3DI 10968 Quadruple SS6L-4 10964 Quadruple Drop In SS6L-4DI 10969 Quintuple SS6L-5 10965...
  • Page 3 Safety All components must be cleaned before first use. According to food and safety IMPORTANT Clean, rinse, sanitize, regulations, most foods must be and dry parts at a minimum stored and/or served at certain of every 24 hours. Always temperatures or they could comply with local sanitization become hazardous.
  • Page 4 Assembly Mount the nozzle onto the end of the pump housing. Bend the outer portion of the nozzle inside out. Insert into opening. Tab of nozzle faces towards housing. Flip the outer portion of the nozzle over the end of tube. Insert dome into the pump housing.
  • Page 5 Attach connector to hose Fit the bottom holes on hose over the pegs on the connector. Piercing end of the connector must face away from pump housing. Connect pump to pouch Put new pouch on countertop with fitment facing up. Place piercing end of connector in center of the fitment.
  • Page 6 Insert the lid Hold the lever up while inserting lid tabs into slots in back of dispenser shroud. Prime pump Press lever several times until food is visible in discharge tube. Drop-In Dispensers Add Corner Guards: Hook first tab into slot. Push firmly on second tab to Snap...
  • Page 7 Setting the Portion Remove locking washer Use a flathead screwdriver to pry off the locking washer from the pin at the end of the link arms. Keep locking washer for step 4. Remove pin Slide the pin out from the pair of link arms and portion holes.
  • Page 8: Tips And Troubleshooting

    Pro Tip: Clean water may be used as lubrication when fitting hose onto pegs. Optimize pouch evacuation: Ensure ramp is in place. Available In the USA through: Asept International Inc. 900 Oakmont ln, Suite 207, Westmont il 60559, USa +1 (630) 441-5656 Nemco Food Equipment info.us@asept.com...

This manual is also suitable for:

Nemco ss6l-2Nemco ss6l-3Nemco ss6l-4Nemco ss6l-5Nemco ss6l-1diNemco ss6l-2di ... Show all