Setting The Sound And The Sensitivity; Connecting Two Rp-2 Pads - Roland RM-2 Owner's Manual

METRONOME LEVEL
Adjusts the metronome's volume level.
off, 1–8
off, 1–2 (Adjusts the volume of the metronome sound that is heard when nothing is
connected to the HEADPHONE/OUTPUT jack.)
METRONOME MODE
Changes the metronome display.
off, 1–7

Setting the Sound and the Sensitivity

The RM-2 features 28 different drum sounds, which can add rich expression to your
performances.
Additionally, you can fine-tune the sensitivity of the connected pads will have, allowing you
to achieve just the right feel and response.
fig.04-03
1. Press the [SELECT] button to select the parameter to be changed.
Hold down the [SELECT] button and press the [
up in the reverse order.
2. Press the [
parameters.
For more detailed information on each individual parameter, refer to the Parameter List that
follows.
3. Press the [SELECT] button until you return to the normal tempo screen.
You can also return to the normal tempo screen by holding down the [SELECT]
button for at least two seconds.

Connecting Two RP-2 Pads

With two RP-2 pads connected to Trigger Input 1 and 2, you can make different sound
settings for each pad.
1. Press the [SELECT] button to select "PAD INST."
2. Strike the pad connected to Trigger Input 1.
When you strike the pad, the Trigger 1 indicator flashes, indicating the pad being set.
3. Press the [
4. Change the "PAD SENS" setting.
5. Now strike the pad connected to Trigger Input 2.
When you strike the pad, the Trigger 2 indicator flashes, indicating the pad being set.
6. Change the "PAD INST" and "PAD SENS" settings.
Sensitivity
Instruments
] or [ ] button to set the values for the "PAD INST" and the "PAD SENS"
] or [ ] button to set the values for the "PAD INST."
Operation of the RM-2
] button to have selections come
15