Installing The Raid Driver And Operating System - Gigabyte W480 VISION D User Manual

3-2

Installing the RAID Driver and Operating System

With the correct BIOS settings, you are ready to install the operating system.
A. Installing Windows
As some operating systems already include Intel RAID driver, you do not need to install separate RAID driver
®
during the Windows installation process. After the operating system is installed, we recommend that you install
all required drivers from the motherboard driver disk using "Xpress Install" to ensure system performance and
compatibility. If the operating system to be installed requires that you provide additional SATA RAID driver during
the OS installation process, please refer to the steps below:
Step 1:
Copy the IRST folder under Boot in the driver disk to your USB thumb drive.
Step 2:
Boot from the Windows setup disk and perform standard OS installation steps. When the screen requesting you
to load the driver appears, select Browse.
Step 3:
Insert the USB thumb drive and then browse to the location of the driver. The location of the driver is as follows:
\IRST\f6flpy-x64
Step 4:
When a screen as shown in Figure 1 appears, select Intel(R) Chipset SATA/PCIe RST Premium Controller
and click Next to load the driver and continue the OS installation.
Figure 1
- 75 - Configuring a RAID Set