Removing The Seat - Husqvarna FE 501s 2023 Owner's Manual

12.18

Removing the seat

SERVICE WORK ON THE CHASSIS 12
–
Position the foot brake cylinder.
Push rod
The dust boot is correctly positioned.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
F03550-10
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever on
angle lever
Info
Pay attention to flat area
F02308-10
–
Mount and tighten screw
Guideline
Screw, bottom
shock absorber
Info
Raise the link fork slightly to be able to mount the
screw more easily.
–
Attach frame protector in area
–
Mount and tighten screws
Guideline
Screw, frame pro-
tector
–
Mount the new cable ties.
F03545-11
Finishing work
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Remove the air filter box cover. (
3
engages in the foot brake cylinder.
4
.
M6 10 Nm (7.4 lbf ft)
5
.
M14x1.5 60 Nm (44.3 lbf ft)
B
.
6
.
M10 60 Nm (44.3 lbf ft)
C
and position.
7
with the washers.
M5 3 Nm (2.2 lbf ft)
p. 67)
®
Loctite 2701™
p. 53)
65