18 SERVICE WORK ON THE ENGINE
128
Info
Drain the engine oil with the engine at operating temperature.
F00441-10
F00442-10
F00443-10
F00442-11
Preparatory work
–
Remove the engine guard. (
–
Park the motorcycle on a level surface.
Main work
–
Position an appropriate container under the engine.
–
1
Remove oil drain plug
–
2
Remove screw plug
with the short oil screen and the O-
rings.
Info
Do not remove screw
–
3
Remove screw plug
with long oil screen
rings.
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and the sealing surfaces.
–
Mount and tighten screw plug
and the O-rings.
Guideline
Screw plug, oil
screen
p. 86)
with the magnet and seal ring.
A
.
4
and the O-
2
with the short oil screen
M20x1.5
15 Nm (11.1 lbf ft)