Service Schedule 10; Additional Information; Required Work - Husqvarna FE 501s 2023 Owner's Manual

Table of Contents

Advertisement

10.1

Additional information

Any further work that results from the compulsory work or from the recommended work must be ordered sepa-
rately and invoiced separately.
Different service intervals may apply in your country, depending on the local operating conditions.
Individual service intervals and scopes may change in the course of technical developments. The most up-to-
date service schedule can always be found on Husqvarna Motorcycles Dealer.net. Your authorized Husqvarna
Motorcycles dealer will be glad to advise you.
10.2

Required work

Read out the fault memory using the Husqvarna Motorcycles diagnostics tool.
Check that the electrical system is functioning properly.
Check and charge the 12-V battery.
Check the front brake linings. (
Check the rear brake linings. (
Check the brake discs. (
Check the brake lines for damage and leakage.
Check the rear brake fluid level. (
Check the free travel of the foot brake lever. (
Check the frame.
(
p. 82)
Check the link fork.
(
p. 82)
Check the fork bearing for play.
Check the shock absorber heim joint for play.
Check the shock absorber linkage.
Check the tire condition. (
Check the tire pressure. (
Check the wheel bearing for play.
Check the wheel hubs.
Check the rim run-out.
Check the spoke tension. (
Check the chain, rear sprocket, engine sprocket, and chain guide. (
Check the chain tension. (
Grease all moving parts (e.g. side stand, hand lever, chain, etc.) and check for smooth
operation.
Check/correct the fluid level of hydraulic clutch. (
Check the front brake fluid level. (
Check the steering head bearing for play. (
Check the valve clearance.
Check the clutch.
Change the engine oil and the oil filter, clean the oil screens.
Check all hoses (e.g. fuel, cooling, bleeder, drainage hoses, etc.) and sleeves for cracking,
tightness, and correct routing.
Check the antifreeze and coolant level. (
p. 89)
p. 95)
p. 87)
p. 93)
p. 92)
p. 102)
p. 102)
p. 103)
p. 78)
p. 84)
p. 88)
p. 59)
p. 116)

SERVICE SCHEDULE 10

every 2,250 km (1,395 mi)
every 1,500 km (930 mi)
every 750 km (465 mi)
after 50 km (31 mi)
p. 79)
(
p. 127)
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fe 501s us 2023F2475w4 2023

Table of Contents