Figure 13. Remove the Wi-Fi card
Screw specifications
M2 x L1.8
Go to
https://support.lenovo.com/partslookup
part:
Wi-Fi card
Remove the I/O board shielding
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 32
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2.
Remove two screws and then remove the I/O board shielding.
Figure 14. Remove the I/O board shielding
Number of screws
1
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
37