FLUENCE RAPTR User's Installation Manual page 3

LUMINAIRE INSTALLATION PROCEDURE
IMPORTANT: For your protection, you must carefully read all warnings and instructions entirely PRIOR TO installation, operation, service or
maintenance Failure to do so can result in personal injury and property damage
1
Remove unit from carton and inspect to ensure no shipping
damage has occurred
3
Determine mounting bracket type needed (sold separately) and install on frame as outlined below Note that the luminaire should be
positioned so that prolonged staring into the luminaire at a distance closer than 2 2 m is not expected
The minimum distance from lighted object is 0 2 m
BRACKET TYPES
Square mounting type
3a
for 70 mm truss
Unistrut mounting type
3b
for 40 x 40 mm
Universal mounting type
3c
4
Hook the mounting bracket to each end of the luminaire in the holes located at each end
4
2
3a 3b
Place unit on the floor with the LED optic chamber facing up
DO NOT place luminaire facing down to
prevent damaging optics.
3c
Hook
Detail