Using An External Display And Mouse To Operate The Mv-8000; The Newly Added Vga/Mouse Screen - Roland MV-8000 Owner's Manual

Using an external display and mouse to
operate the MV-8000
If the MV8-VGA is installed in the MV-8000, you can connect an external display
(VGA) and the included mouse, and perform operations from the external display.
Even when you are using an external display to operate the MV-8000, you can also
view information on the MV-8000's built-in LCD screen.

The newly added VGA/MOUSE screen

This screen lets you make settings for the external display and mouse if the MV8-VGA
(sold separately) is installed.
fig.vga-mouse-screen
1. Color Theme
You can select the combination of colors used in the external display. Select your
favorite color scheme from the following choices.
Default Chocolate
Mint Slate
Purple Orchid
Grass Tan
Violet Gray
2. Refresh Rate
Sets the rate at which the monitor re-draws it image.
Range: 60, 67, 72, 75 (Hz)
3. H Position and V Position
Adjust the H Position (Horizontal Position) and the V Position (Vertical Position)
parameters if you'd like to shift the image on your VGA monitor.
Refresh Rate
60
67
72
75
4. Pointer Speed
Sets how fast the mouse's cursor moves.
Range: 1 (Slow)–5–9 (Quick)
4
Range
Magenta
Moss Green
Copper
H Position
-3–0–4
-5–0–5
-5–0–5
-5–0–5
V Position
-14–0–14
-21–0–22
-18–0–19
-8–0–9
In order to operate the MV-
8000 using an external display,
the MV-8000's system program
version must be 2.00 or higher.
If you select a value the
monitor doesn't support,
image quality may be poor,
and damage to the monitor
may result.
Depending on the H Position
or V Position settings, the
image shown in the external
display may be distorted. If the
external display you're using
has settings for adjusting the
image position, make
adjustments first on the
external display.