Page 1
Headset Microphones Manual d:fine Omnidirectional d:fine 4065 d:fine 4067 d:fine Directional 4066 4088 d:fine d:fine d:fine d:fine w w w . d p a m i c r o p h o n e s . c o m w w w . d p a m i c r o p h o n e s . c o m / d f i n e...
Page 2
How to tell the difference between d:fine Headset Microphone capsules Introduction Omnidirectional characteristics • The microphone is sensitive to sound from all directions. All the d:fine Headset Microphones provide a uniquely natural and open sound. • The sound remains more or less the same regardless of Ultra-lightweight and adjustable, d:fine Headset Mics ensure a secure and the distance between the sound source and the microphone.
Page 3
Adjusting the d:fine 4065 Adjusting the d:fine Omnidirectional, d:fine Directional, d:fine 66 and d:fine 4065 is pre-formed but may require adjustment in order to get a tight, fixed position to the back of The directional characteristics of the microphone is indicated on the flat microphone head with for omnidirectional and for directional as shown on page 3.
Page 4
Position the microphone properly by pulling or pushing the boom along the slide. Service connector for exchange of cables or booms on the d:fine Omnidirectional, d:fine Direc- tional, d:fine 66 and d:fine Switch between left and right ear wearing style simply by rotating the microphone boom. Hold on to the earhook while gently These d:fine Headset Microphones offer exchange of cables or microphone booms.
Page 5
(preferably 6 – 8 cm (2.5 – 3 in) diameter) and avoid kinks tors, all headsets from DPA are fitted with the MicroDot con- tic cap which serves to protect the microphone The supplied clothing clip allows you to attach in the cable.
Page 6
Frequency Response of d:fine Omnidirectional Polar Pattern of d:fine Omnidirectional Frequency Response (d:fine 4065, 4066, 4067 and d:fine Polar Pattern (d:fine 4065, 4066, 4067 and d:fine 5 dB 80 Hz 20 Hz 1 kHz 125 Hz 4 kHz 8 kHz 250 Hz 16 kHz 500 Hz...
Page 7
Max. SPL, peak before clipping Power supply (for full performance) 144 dB Min. 5 V - max. 50 V through DPA adapter for Power supply (for full performance) wireless systems. 48 V phantom power ± 4 V Min. 5 V - max. 50 V through DPA adapter for with DAD6001-BC XLR adapter wireless systems.