Operation Guide For Local Carousel Application; Picture Requirements; Copy Pictures; Start Picture Carousel - Philips 4000 Series User Manual

4.

Operation Guide for Local Carousel Application

4.1.

Picture requirements

1. bmp, png, jpg, jpeg, webp formats
2. Resolution: The vertical screen supports a resolution of 1800 * 3200, and the horizontal screen supports a resolution of 3200 * 1800.
3. If the resolution of the picture is different from the screen resolution, it can still be displayed. If the picture's resolution is larger than the
screen resolution, it will automatically shrink to fit the screen size.
4.2.

Copy pictures

Copy pictures from a USB flash disk or SD card:
1. Copy the pictures into the Pictures file directory under the USB disk or SD card root directory. For example {root dir of storage}/Pictures/.
2. Insert the USB disk or SD card with the pictures ready into the EPD platform and power cycle the display .
3. After restarting, the application will delete the original pictures directory first, and then copy all the files in the pictures directory of the USB
disk or SD card to the EPD.
4. Prompt after copying is competed: Remove USB and restart it.
5. Reboot the device. The local carousel application is started by default after the device is booted. The carousel will start if there are pictures
in the picture directory.
Copy pictures from a PC:
1. Turn on the EPD and connect it to the computer.
2. Operate on the computer; enter the directory: ePaper Signage -> Internal shared storage -> Pictures.
3. Copy the pictures to be carouselled to the picture directory above.
4. Disconnect the cable between the EPD and the computer.
5. Reboot the device. The local carousel application is started by default after the device is booted. The carousel will start if there are pictures
in the picture directory.
4.3.

Start picture carousel

1. If a power adapter is used, insert the EPD power cord, and the device will boot automatically. If the battery is used, press and hold the
power key for 2 seconds to start the device after the battery is put in.
2. After starting, the carousel of the pictures in the picture directory will automatically start playing.
3. If there is only one image in the EPD device, it will automatically shut down after the image is displayed to save power.
4.4.

Carousel function setting

To change the carousel settings, add the config.xml file (together with pictures) when copying the pictures.
If the config.xml file is not added, the default settings will be used for the carousel.
Default carousel settings:
• The device will enter sleep mode after displaying the pictures.
• The picture is displayed from the bottom left corner of the screen.
• The picture display interval is 30 seconds.
5
25BDL4050I