Table of Contents
Advertisement
5.
Operation
NOTE: The control button described in this section is mainly
on the remote control unless specified otherwise.
5.1.
Watch the Connected Video Source
1. Press the [
] SOURCE button.
2. Press [ ] or [ ] button to select a device, then press [
button.
5.2.
Change Picture Format
You can change the picture format to suit the video source.
Each video source has its available picture formats.
The available picture formats depend on the video source:
1. Press [
] FORMAT button to select a picture format.
•
PC mode: {Full} / {4:3} / {1:1} / {16:9} / {21:9}/ {Custom}.
•
Video mode: {Full} / {4:3} / {1:1} / {16:9} / {21:9}/
{Custom}.
5.3.
Overview
1. Android PD launcher:
•
Android PD launcher is a black page as shown below:
•
Exit the App by pressing the "Back" key and the screen
will enter Android PD launcher.
•
When you return to Android PD launcher, a hint
image will be prompted on the screen for 5~10
seconds.
•
The hint image notifies you that you can press source
key to change source.
2. Admin mode:
•
Press "Home + 1888" to enter the Admin mode. Please
make sure that you see the Home OSD menu after
"Home" is pressed, and then press 1888 in sequence.
Two continuous "Home" keys will not be a valid
hotkey.
•
The Admin mode consists of the following Apps:
"Settings", "Apps", "Network" "Storage" and "Help".
]
•
When leaving from the Admin mode, the system will
return to last source.
Settings: go to Settings page.
Applications: show all apps.
Network: set Wi-Fi, Ethernet and Mobile network
(optional).
Storage: go to Storage page.
Help: display QR code to get help.
1) Settings page:
2) Application page:
29
65BDL4650D/75BDL4650D/86BDL4650D
Advertisement
Table of Contents
Troubleshooting
