Wireless; Maintenance Screen; System Logs - Dell Vostro 3590 Setup And Specifications Manual

Option Description
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities
provided by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O - enabled by default.
Trusted This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional
Execution hardware capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization
Technology, and the Virtualization technology for direct I/O must be enabled to use this feature.
Trusted Execution - disabled by default.

Wireless

Option
Description
Wireless Switch Allows to set the wireless devices that can be controlled by the wireless switch. The options are:
● WLAN
● Bluetooth
All the options are enabled by default.
Wireless Device Allows you to enable or disable the internal wireless devices.
Enable
● WLAN
● Bluetooth
All the options are enabled by default.

Maintenance screen

Option Description
Service Tag Displays the Service Tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.
BIOS Downgrade This controls flashing of the system firmware to previous revisions. Option 'Allow BIOS downgrade' is
enabled by default.
Data Wipe This field allows users to erase the data securely from all internal storage devices. Option 'Wipe on Next
boot' is not enabled by default. The following is list of devices affected:
● Internal SATA HDD/SSD
● Internal M.2 SATA SDD
● Internal M.2 PCIe SSD
● Internal eMMC
BIOS Recovery This field allows you to recover from certain corrupted BIOS conditions from a recover file on the user
primary hard drive or an external USB key.
● BIOS Recovery from Hard Drive—enabled by default
● Always perform integrity check—disabled by default

System logs

Option Description
BIOS Events Allows you to view and clear the System Setup (BIOS) POST events.
NOTE: For WLAN enable or disable controls are tied together and they cannot be enabled or disabled
independently.
System setup 25