Advertisement
Available languages
Available languages
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH THE EUROPEAN DIRECTIVE ON WASTE ELECTRICAL AND
ELECTRONIC EQUIPMENT (WEEE)
At the end of its working life, the product must not be disposed of as urban waste. It must
be taken to a special local authority differentiated waste collection centre or to a dealer
providing this service.
Guarantee UK only
If your Stand Mixer goes wrong within
l
one year from the date you bought
it, we will repair it (or replace it if
necessary) free of charge provided:
it has been used in accordance with
l
these instructions.
you have not misused, neglected, or
l
damaged it;
Troubleshooting Guide
Problem
The whisk, K-beater
knocks against the
bottom of the bowl
or not reaching the
ingredients in the
bottom of the bowl.
Slow speed attachment
cannot be fitted.
'Mixer ready indicator
light' flashing when
Stand Mixer first
plugged in.
Cause
Tool at the wrong height
and needs adjusting.
Check your attachment is
compatible for use with
your model.
Twist connection system
required (Model KAX)
Speed control not in the 'O'
position.
Mixer head in the raised
position or not locked
down correctly.
12
it has not been modified (unless by
l
KENWOOD);
it is not second hand;
l
it has not been used commercially;
l
you have not fitted a plug incorrectly;
l
and
you supply your receipt to show when
l
you bought it.
This guarantee does not affect your
statutory rights.
Solution
Adjust the height using a
suitable spanner – see "Tool
Adjustment" section.
Attachment must have the KAX
twist connection system
fit the outlet.
If you own attachments
featuring the Bar Connection
System
use the KAT002ME adaptor
to connect these to the Twist
Connection System on your
Stand Mixer.
For more information visit
www.kenwoodworld.com/twist.
Check and turn speed control to
the 'O' position.
Check Stand Mixer head is
locked down correctly.
to
you will need to
Advertisement
