Related Manuals for Stern LOTUS TOPFILL E
Summary of Contents for Stern LOTUS TOPFILL E
- Page 1 LOTUS TOPFILL E SOAP DISPENSER WITH SOAP LEVEL INDICATOR TOUCH FREE DECK MOUNTED SOAP DISPENSER I N S T A L L A T I O N A N D M A I N T E N A N C E G U I D E...
-
Page 2: Technical Data
Soap viscosity 100 – 3800 The information in this document reflects products at the date of printing. Stern Engineering Ltd reserves the right, subject to all applicable laws, at any time, at its sole discretion, and Standard discharge 1.4cc (customizable by optional remote control) without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or temporarily withdraw any of the forgoing from the market. -
Page 3: Pre-Installation Info
STERN liquid soap dispensers are suitable for use with any generic liquid soap of the correct viscosity and pH. The pH level of all soap used in STERN liquid soap dispensers 1 X PUMP ASSEMBLY should be between 6.5 to 8.5. -
Page 4: Installation
INSTALLATION INSTALLATION RECOMMENDED HOLE SIZE Connnect the soap pipe from the dispenser body into the quick connection fitting of the pump. Fix the tank with bottle support to the desired location. SIDE VIEW FRONT VIEW Keep a distance (DISTANCE = 210 mm / 9-3/4") from the wall to prevent difficulty, while opening cap to fill soap. STEP 1 –... -
Page 5: Filling The Soap Tank
FILLING THE SOAP TANK FILLING THE SOAP TANK Release the cap from the soap To prime the soap, you have two dispenser by turning it clockwise, until options, you can press and hold there is a click. Proceed by lifting the the refill button located at the back cap from the Soap Dispenser and filling press... -
Page 6: Settings Adjustment With A Remote Control
(10-15cm). If a defect is found in normal use, Y. Stern Engineering Ltd. will, at its discretion, repair, Attention: Holding the soap dispenser remote control out of the recommended range (too close or too far) may interfere with the remote activation. -
Page 7: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING Problem Indicator Cause Solution Illustration Problem Indicator Cause Solution Illustration False Continuous AUX connector not The connector should be inserted fully Soap not Pump not making sound AUX connector not The connector should be inserted fully activation: discharge from the fully inserted until white o-ring is not visible. - Page 8 TROUBLESHOOTING SOAP LEVEL INDICATOR TROUBLESHOOTING SOAP LEVEL INDICATOR PROBLEM INDICATOR CAUSE SOLUTION PROBLEM INDICATOR CAUSE SOLUTION The level Open the coupling nut, Refill the soap tank. indicator is red, unscrew the cover and take Soap has run low or is completely out. but the tank is the sleeve with the level Refer to page 6...
- Page 9 777 Passaic Avenue, Clifton NJ,07012, USA Tel: +1-973 773 8011 | Fax: +1-973-779-8768 Toll Free: 1-800-4364410 info@sternfaucets.com | tech@sternfaucets.com 09.22 01500541-A...
Need help?
Do you have a question about the LOTUS TOPFILL E and is the answer not in the manual?
Questions and answers