Tune Mode - Boss Dr. Beat DB-88 Owner's Manual

Tune Mode

Allows a broad range (C2–B6) to be used for the
reference note. Since this mode allows you to
specify the reference pitch and the note name, it
can be used for practicing wind instruments as
well as for tuning.
5
18
2
1
3
4
1. Make sure that the unit is switched on,
then press the Tune Mode button to get
into the Tune mode.
If you wish to use the note name previously
written in a Program Number, call the relevant
Program Number with the Program -/+ but-
tons, and go to step 4.
2. Set the note name (NOTE) of the reference
note with the Dial.
The note name can be set in the range of C2–
B6.
* If you rotate the Dial while holding the Tune
Mode button down, the note name "C4" will be
automatically selected. This function may be ef-
fectively used for resetting or quick change of the
note name.
* If the setting is different from the preprogrammed
data, the "ED" mark will appear in the display
showing that it is being edited.