Operation; Using The Unit As A Metronome - Boss Dr. Beat DB-88 Owner's Manual

OPERATION

Using the Unit as a Metronome

The following explains how to use the unit as a
metronome. Setting changes you make can be
stored at a Program Number (1–8).
2 7 1 5 6
1. Make sure that the unit is switched on,
then press the Metronome Mode button to
get into the Metronome mode.
To use the Rhythm preprogrammed at a Pro-
gram Number, call up the relevant Program
Number using the Program -/+ buttons, then go
to step 6.
2. Set the Accent Level slider and Rhythm
Level sliders as shown in the picture.
If it happens to be a different setting from the
3
data previously programmed, the display shows
"ED" mark showing that it is now being edited.
3. Set the tempo with the Dial.
4
* If you rotate the Dial while holding the Metro-
nome Mode button down, the tempo will be
automatically set to "120." This can be used for
resetting or changing the tempo rapidly.
11