Reef Factory RFLK01 User Manual page 11

-∞ mode - in continuous mode, refilling occurs when both sensors
detect a low level, and the replenishment is interrupted if one of the
sensors detects a high level. In this operating mode, notifications
about exceeding the water level are sent (both level sensors in the
upper position). In this mode, the sensors should be set as shown in
the illustration
-⎎ mode - in the hysteresis mode, refilling occurs only when both
sensors detect a low level, and refilling is interrupted if both sensors
indicate a high level. Attention! In this operating mode, notifications
about exceeding the water level are not sent. In this mode, the
sensors should be positioned as shown in the illustration.
The level sensors operate simultaneously and measure the water level continuously. The use of two
liquid level sensors additionally protects your tank against liquid overflow in the event of improper
operation of one of the sensors, e.g. blockage due to contamination).
User manual Level keeper
Reef Factory 2022
©
11