Advertisement
Quick Links
Advertisement
Related Manuals for Reef Factory TDS
Summary of Contents for Reef Factory TDS
- Page 1 Thank you for purchasing our device TDS meter TDS meter device manual 1/11...
- Page 2 Apart from the TDS meter device itself, the package contains the following elements: a power supply unit, a magnet that can be used to reset the device and an abbreviated manual. In order to set up the device correctly, follow the steps below.
- Page 3 Internet network (wired or wireless) is still active. Try to reconnect to the Wi-Fi module of the device and repeat step 3 as described above. TDS meter device manual 3/11...
- Page 4 Set up your device in five simple steps. Step one - choose the language you want to use when operating the device. TDS meter device manual 4/11...
- Page 5 Step two - set up the device parameters, i.e.: TDS value (water impurity level), at which an alert will be triggered. In order to set the value, drag the red dot and place it on the water purity scale. The water purity level is measured by the TDS sensor. If the water purity parameters exceed the specified value (5 ppm by default), the TDS meter device will inform you about it, by generating a sound alert and displaying messages on its screen.
- Page 6 Smart Reef system, the network device which is connected to TDS meter needs to have Internet access. When TDS meter successfully connects to your Wi-Fi network, its IP number will appear in the upper left corner of the screen. The appearance of the IP number means that everything is alright.
- Page 7 TDS meter device manual 7/11...
- Page 8 If you don’t need to manage your device remotely, you may ignore this step. However, by doing so you will miss out on several additional features, such as access to device updates. TDS meter device manual 8/11...
- Page 9 Step five - congratulations, you have successfully set up your TDS meter device. TDS meter device manual 9/11...
- Page 10 Moreover, the icons show the current status of connection to your wireless network and to the Smart Reef system. symbol means that the connection is OK, while the symbol means that there is no connection. TDS meter device manual 10/11...
- Page 11 7. Mount the TDS sensor in the reverse osmosis water purification system in such a way that ensures correct water purity measurement. After the device is installed and powered, wait for a while until the it shows the water impurity reading.
Need help?
Do you have a question about the TDS and is the answer not in the manual?
Questions and answers