Resetting The Device; Changing The Access Password To The Device - Reef Factory RFLK01 User Manual

Level keeper
Table of Contents

Advertisement

If your device is not working
properly, you want to
reconfigure it or you cannot
connect to it after several
attempts, you can restore it to
factory settings by applying the
magnet (included in the set) to the device's housing in the place marked RESET.
After resetting the device to factory settings, reconfiguration and calibration are required.
VII. Changing the device access password
For security reasons, it is recommended to change the standard device
access password. The password should be su ciently complex to
prevent third parties from connecting to the device. Changing the
password requires a direct connection to the device's Wi-Fi network, as
in step 4 of the initial device setup.
Once you are connected to the device, expand the list by clicking on the
3 bars in the upper right corner of the screen, then go to the Wi-Fi
network settings.
User manual Level keeper
VI. Resetting the device
Enter your current password (default is reeffactory)
then press "OK".
In the next step, enter a new password and press "OK",
then confirm the new password and press "OK".
Congratulations! The password has been changed successfully.
Reef Factory 2022
©
16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RFLK01 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents