Advertisement
Code
Possible Cause
The voltage input is
E1
lower than 85V.
The voltage input is
E2
higher than 130V.
IGBT sensor open /
E3
short circuit.
The thermistor is
E4
down for the
burners.
The thermistor is
E5
open / short-
circuited.
The burner is
E6
overheated / dry
cooking.
For further concerns, please contact the support team for proper help.
Attempting to repair the machine without a qualified guide is dangerous and could result
in serious injury or damage. Always seek the assistance of a qualified professional to ensure
safe and effective repairs.
Answer / Solution
Unplug the cord from the electrical
outlet. Verify the voltage is 110/120V
AC with a voltage tester. If not, switch
to a different electrical outlet with
the proper voltage before operating
the appliance.
Please contact the seller.
1.Unplug the cord from the electrical
outlet.
2.Wait 10 minutes for the cooktop
and cookware to cool down, and
then reconnect the cord to the
electrical outlet.
3.Turn the cooktop back on and listen
for the fan to run.
4.Ensure the cooktop is at least 4
inches away from any obstruction
to avoid potential hazards.
5.If the error continues, try using
cookware with a larger surface.
11
Tips
The LED flashes, the
appliance beeps 5
times. The burners
stop heating.
Advertisement
