Summary of Contents for Razorri Comodo ICG01A
- Page 1 Induction Cooktop Comodo ICG01A USER MANUAL READ THIS MANUAL THOROUGHLY BEFORE USE AND SAVE IT FOR FUTURE REFERENCE.
-
Page 2: Table Of Contents
SAFETY & WARNING ·················································01 SPECIFICATIONS ·····················································03 OPERATING INSTRUCTIONS ·········································06 CARE AND MAINTENANCE ··········································09 TROUBLESHOOTING ··················································10... -
Page 3: Safety & Warning
Contact RAZORRI customer service for examination, repair, or adjustment. Using attachments or accessories other than those supplied by RAZORRI can create a hazard. Do not use incompatible parts. Do not use outdoors or while standing in a damp area. - Page 4 When in use, keep the hot plate a minimum of 4-6 inches away from walls or cabinets for proper ventilation. Place on a stable, heat-resistant surface and in a well-ventilated area. Place the appliance on a dry and horizontal surface. Do not block the cool air inlet and fan. A fire may occur if the Induction Cooktop is covered or touching flammable material, such as curtains, draperies, walls, etc., while in operation.
-
Page 5: Specifications
SPECIFICATIONS Product Name Razorri Electric Induction Cooktop Product Model ICG01A Voltage and Frequency 120V~60 Hz Rated Power 1800 W (Left burner: 1000W, Right burner: 800W) Power Level P1-P7 (Power mode), C1-C5 (Temperature mode) Product Dimensions 20.2 x 10.5 x 4.7 IN... - Page 6 Parts List Metal Lid with Handle (Non-stick Teflon Coating) Non-slip Stand Cool Air Inlet & Fan Cast Iron Griddle Pan (Non-stick Teflon Coating) Left Control Panel with LED Display Heat Exhaust Vent Right Control Panel with LED Display Power Cord...
- Page 7 Suitable cookware materials are IRON, CAST IRON, ENAMELED IRON, STEEL, or STAINLESS STEEL. If a magnet sticks to the bottom of your cookware, the cookware will work on your RAZORRI Induction Cooktop. The bottom of the cookware must: Be made of a ferromagnetic material.
-
Page 8: Operating Instructions
OPERATING INSTRUCTIONS This unit offers both P (Power) and C (Temperature) Modes for precise and efficient cooking along with a 99-minute timer. Note: DO NOT use the included Iron Cast Griddle Pan under P Mode in case of any high-temperature damage. Activate The Appliance 1.Place the Induction Cooktop on a dry, sturdy, level, and heat-resistant surface. - Page 9 C Mode (Temperature) Operation With Entire Pan Mode Note: ONLY use the included Iron Cast Griddle Pan under Entire Pan Mode to avoid any high-temperature damage. 1.After powering on, press the Entire Pan button to adjust both burners as an entire pan. Adjust one knob to adjust both burners together, with both Pan indicators light on.
- Page 10 Right Pan Level Table Left Burner Right Burner Power Level Watts Right Pan Level Temperature ℉ ℃ / 120 ℉ ℃ / 140 ℉ ℃ / 160 ℉ ℃ / 180 ℉ / 210 ℃ 1000 P(Power) Mode vs. C (Temperature) Mode If a specific cooking temperature is not required, we suggest using P Mode instead of C Mode.
-
Page 11: Care And Maintenance
CARE AND MAINTENANCE Always unplug the unit and confirm it has cooled down completely before cleaning and storing. Turn OFF the Induction Cooktop and unplug the appliance before cleaning. Wait for the Induction Cooktop to cool down completely before cleaning. Clean the body of the Induction Cooktop with a damp cloth using a non-abrasive household detergent. -
Page 12: Troubleshooting
TROUBLESHOOTING Problem Cause The plug may not be securely inserted into the electrical outlet. Cooktop does not work. The circuit breaker may be malfunctioning or has tripped. Using cookware that is not magnetic and not compatible The LED Display is on, but the with induction cooking. - Page 13 Code Possible Cause Answer / Solution Tips Unplug the cord from the electrical The voltage input is outlet. Verify the voltage is 110/120V lower than 85V. AC with a voltage tester. If not, switch to a different electrical outlet with The voltage input is the proper voltage before operating higher than 130V.