M.2 solid-state drive and box
Prerequisite
Before you start, read
Generic Safety and Compliance Notices
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
For access, do the following:
1. Remove any media from the drives and turn off all connected devices and the computer.
2. Disconnect all power cords from electrical outlets and disconnect all cables from the computer.
3. Remove the flex module. See "Flex module" on page 67.
Removal steps
Remove the M.2 solid-state drive.
, and print the following instructions.
.
Chapter 6
Hardware removal and installation
69