Playing Sampled Sounds - Roland Fantom X6 User Manual

Playing sampled sounds

Samples (i.e., sounds you've recorded by sampling) can be selected from the
patch list in the same way as ordinary patches.
fig.0-07.e
Procedure
1.
Sample a sound.
2.
Select a sample from the patch list.
You can play the sample at different pitches in the same way as an ordinary patch.
* You can also specify that the sample be played using a pad.
fig.0-07a
22
→ "Sampling Procedure" (p. 142) in Owner's Manual
You can also assign samples so they can be played from the pads.
→ "Assigning Samples to a Pad (Assign To Pad)" (p. 151) in Owner's Manual
2
Select the patch that plays the sound you sampled.
1
Select "USAM" (or "CSAM" if you're using a card).
Sample