Table of Contents
Advertisement
TROUBLESHOOTING
Top lamp
Step 1
Turn the glass cover to remove it.
Step 2
Remove the metal ring and clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Attach the metal ring to the glass cover and install it.
Side lamp
Step 1
Remove the left shelf support to get access to the lamp.
Step 2
Use a Torx 20 screwdriver to remove the cover.
Step 3
Remove and clean the metal frame and the seal.
Step 4
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 5
Install the metal frame and the seal. Tighten the screws.
Step 6
Install the left shelf support.
12. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
40/52
Advertisement
Table of Contents
