Table of Contents
Advertisement
Installation instructions
FULLY INTEGRATED MODELS
SAFETY INSTRUCTIONS:
1. It is important that you closely follow the
instructions provided here.
2. An incorrect or defective installation can lead
to higher consumption of energy, water and
dishwashing detergent, which can lead to hig
her costs and poorer cleaning results.
3. Plumbing and electrical installations must be
carried out by qualified professionals.
4. Exercise caution during the installation! Wear
protective gloves! Always work in pairs!
5. The power socket must be fitted outside the
cavity for the dishwasher to enable easy access
after installing the machine.
6. Always follow the applicable regulations for
water, drain and electrical connection.
7. A dishwasher fitted with a wired plug must be
connected to an earthed socket.
Caution!
Turn off the water supply when installing the
dishwasher!
SEMI-INTEGRATED MODELS
BEFORE STARTING THE INSTALLATION:
1. Connection to water supply:
• There must be a shut off valve on the water
There must be a shut off valve on the water
supply pipe. The shut off valve should be in
stalled in a location that is easily accessible so
that the water may be shut off in the event that
the dishwasher needs to be moved.
2. Installation advice:
• Cable holes for wires/cables need not be
larger than 40 mm.
• Affix
the light shielding film
washer in place). Not all models.
• Place a watertight protective tray on the floor
under the dishwasher to prevent any water leak
age.
Note:
Check that the fitting and connection measure
ments are correct. See Installation and connec-
tion information.
(see Fitting the dish
Advertisement
Table of Contents
