Installation Instructions - Atag VA9611ST Use & Care Manual

Table of Contents

Advertisement

Installation
SAFETY INSTRUCTIONS:
1. It is important that you closely follow the
instructions provided here.
2. An incorrect or defective installation can lead
to higher consumption of energy, water and
dishwashing detergent, which can lead to
higher costs and poorer cleaning results.
3. Plumbing and electrical installations must be
carried out by qualified professionals.
4. Exercise caution during the installation! Wear
protective gloves! Always work in pairs!
5. The power socket must be fitted outside the
cavity for the dishwasher to enable easy ac-
cess after installing the machine.
6. Always follow the applicable regulations for
water, drain and electrical connection.
7. A dishwasher fitted with a wired plug must be
connected to an earthed socket.
Caution!
Turn off the water supply when installing the
dishwasher!
34
BEFORE STARTING THE INSTALLATION:
1. Connection to water supply:
• There must be a shut off valve on the water
supply pipe. The shut off valve should be in-
stalled in a location that is easily accessible so
that the water may be shut off in the event that
the dishwasher needs to be moved.
2. Installation advice:
• Cable holes for wires/cables need not be
larger than 40 mm.
• Do not attach the plastic feet if the installation
space is of minimum height.
Note:
Check that the fitting and connection measure-
ments are correct.

Advertisement

Table of Contents
loading

Table of Contents