Sanyo SAP-K71GH Technical & Service Manual page 57

1 HR. TIMER button
MODE selector button
FLAP button
FAN SPEED
selector button
NOTE
Transmitter
Display
NIGHT SETBACK
button
TEMP. setting buttons
ON/OFF operation
button
8
Remote Control Unit
AIR CONDITIONER
Display
1 HR.
TIMER
ON I /OFF
MODE
FLAP
FAN SPEED
SELECT
The illustration above pictures the remote control unit after the cover
has been lowered and removed.
When you press the buttons on the remote control unit, the
appears in the display to transmit the setting changes to the receiver in
the air conditioner.
Information on the operating conditions is displayed while the remote
control unit is switched on. If the unit is turned off, only the mode that
was set previously is still displayed.
For details, see ''Night Setback Mode''. When you press this button in
the HEAT, DRY or COOL mode, the
the remote control unit will automatically adjust the set temperature to
save energy.
Press the button to increase the set temperature.
Press the button to reduce the set temperature.
This button is for turning the air conditioner on and off.
Transmitter
SET TEMP.
C
1
HR.
TEMP.
TEMP. setting buttons
ON/OFF operation button
NIGHT
ON SETBACK
NIGHT SETBACK button
OFF
TIMER ON button
SET
ACL
TIMER OFF button
TIMER
ACL button
BATTERIES
TIMER SET button
(which advances the time
displayed)
Battery compartment
(Pull off the cover to expose the
batteries.)
mark appears in the display, and
AIR CONDITIONER
(Cover closed)
mark
OI-153-08EG