2.
Attach the handle to the machine using the holes at the end of the handle (B of
3.
Move the handle rearward to the operating position (C of
4.
Ensure that the cables are routed to the outside of the handle (D of
5.
Secure the knobs and carriage bolts to lock the handle into the operating position (E of
Note:
You can adjust the height of the handle by changing the holes for the knobs and carriage bolts.
2
Installing the Recoil-Starter Rope in the Rope Guide
No Parts Required
Procedure
Important:
To start the engine safely and easily whenever you use the machine, install the recoil-starter
rope in the rope guide.
Figure
3).
Figure 4
6
Figure
3).
Figure
3).
Figure
3).
g228152