Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Trotec PSCS 10-16V
Summary of Contents for Trotec PSCS 10-16V
- Page 1 PSCS 10-16V / PSCS 10-20V ORIGINAL INSTRUCTIONS CORDLESS DRILL DRIVER...
-
Page 2: Table Of Contents
Info Information marked with this symbol helps you to carry out your tasks quickly and safely. Follow the manual Information marked with this symbol indicates that the instructions must be observed. cordless drill driver PSCS 10-16V / PSCS 10-20V... -
Page 3: Safety
Use of a cord safety principles. A careless action can cause severe suitable for outdoor use reduces the risk of electric shock. injury within a fraction of a second. cordless drill driver PSCS 10-16V / PSCS 10-20V... - Page 4 • Keep handles and gripping surfaces dry, clean and free from oil and grease. Slippery handles and gripping surfaces do not allow for safe handling and control of the tool in unexpected situations. cordless drill driver PSCS 10-16V / PSCS 10-20V...
- Page 5 This will whilst adhering to the technical data. ensure that the safety of the power tool is maintained. We recommend using the power tool with original Trotec • Never service damaged battery packs. Service of accessories.
- Page 6 Make sure not to hit power, gas or water lines when working with a power tool. If necessary, use a pipe detector to check the wall you want to drill in or slit open. cordless drill driver PSCS 10-16V / PSCS 10-20V...
-
Page 7: Information About The Device
• 1 x Cordless drill driver • 1 x Rechargeable battery • 2 x Bits (50 mm) • 1 x Quick charger • 1 x Belt clip • 1 x Transport case • 1 x Manual cordless drill driver PSCS 10-16V / PSCS 10-20V... - Page 8 80.5 dB(A) Uncertainty K 3 dB(A) 3 dB(A) Vibration information according to EN 60745 Vibration emission value drilling in 1.03 m/s 1.03 m/s metal / screwing ah=in Uncertainty K 1.5 m/s 1.5 m/s cordless drill driver PSCS 10-16V / PSCS 10-20V...
-
Page 9: Transport And Storage
• Allow the device to cool down. • Remove the battery from the device. • Remove the tool from the tool holder. The supplied Li-ion batteries are subjects to the requirements of dangerous goods legislation. cordless drill driver PSCS 10-16V / PSCS 10-20V... -
Page 10: Start-Up
LED in the battery level indication (4) is illuminated), the battery should be charged. To do so, please proceed as follows: 1. Slide the battery (8) onto the quick charger (9) upside down until it locks in place. cordless drill driver PSCS 10-16V / PSCS 10-20V... - Page 11 / power Orange – Red medium charge / power weak charge – Recharge the battery. 1. Press the on / off switch (16). ð You can read the battery status from the battery level indication (4). cordless drill driver PSCS 10-16V / PSCS 10-20V...
- Page 12 ð Speed level 1: Speed of up to 400 rpm, suitable for all screwing applications. ð Speed level 2: Speed of up to 1400 rpm (PSCS 10-16V) or 1550 rpm (PSCS 10-20V), suitable for drilling. cordless drill driver PSCS 10-16V / PSCS 10-20V...
-
Page 13: Operation
• For larger drilling diameters, use a smaller drill bit for pre- drilling. • To achieve ideal results, the drill bit should be cooled with a suitable lubricant. • Metal drill bits may also be used for drilling in plastic. cordless drill driver PSCS 10-16V / PSCS 10-20V... - Page 14 / off switch (16). 4. Remove the tool from the device (see Start-up chapter). 5. Clean the device according to the Maintenance chapter. 6. Store the device according to the Storage chapter. cordless drill driver PSCS 10-16V / PSCS 10-20V...
-
Page 15: Available Accessories
• Check the quick charger for damages. Should the quick Please contact the customer service. If necessary, bring the charger be damaged, stop using it. Contact the Trotec device to an authorized specialist electrical company or to customer service. -
Page 16: Maintenance
• Remove any drilling dust and, if applicable, wood chips from the keyless drill chuck. • Keep the connecting terminals on the device and charger clean. • Keep the ventilation openings free from dust deposits to prevent overheating of the motor. cordless drill driver PSCS 10-16V / PSCS 10-20V... -
Page 17: Declaration Of Conformity
Trotec GmbH & Co. KG Grebbener Straße 7, D-52525 Heinsberg Phone: +49 2452 962-400 E-mail: info@trotec.de Place and date of issue: Heinsberg, 01.02.2017 Detlef von der Lieck, Managing Director cordless drill driver PSCS 10-16V / PSCS 10-20V... - Page 19 Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...