Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Trotec PHDS 10-20V
Summary of Contents for Trotec PHDS 10-20V
- Page 1 PHDS 10-20V OPERATING MANUAL CORDLESS HAMMER DRILL...
-
Page 2: Table Of Contents
This signal word indicates important information (e.g. © Trotec GmbH & Co. KG material damage), but does not indicate hazards. Info Information marked with this symbol helps you to carry out your tasks quickly and safely. Operating manual – cordless hammer drill PHDS 10-20V... -
Page 3: Safety
"live" and could give the without supervision. operator an electric shock. The term power tool used in the safety warnings refers to both mains-operated and battery-powered electric tools (with/ without power cable). Operating manual – cordless hammer drill PHDS 10-20V... - Page 4 The use of a dust person using only identical replacement parts. This will extraction system may reduce dust-related hazards. ensure that the safety of the power tool is maintained. Operating manual – cordless hammer drill PHDS 10-20V...
- Page 5 • For any work on the device, as well as during transport or storage, set the switch for the rotational direction to centre position (locked). This prevents unintentional starting of the power tool. Operating manual – cordless hammer drill PHDS 10-20V...
- Page 6 (see operating manual). Warning of explosive substances Do not expose the battery to temperatures above 45 We recommend using the power tool with original Trotec °C! Do not let the battery come into contact with water accessories.
-
Page 7: Information About The Device
A wrong selection may damage the device. Notice If you store or transport the device improperly, the device may be damaged. Note the information regarding transport and storage of the device. Operating manual – cordless hammer drill PHDS 10-20V... - Page 8 • 1 x Rechargeable battery • 1 x Charger • 2 x Bits (50 mm) • 1 x Belt clip • 1 x Anti-vibration handle • 1 x Transport case • 1 x Manual Operating manual – cordless hammer drill PHDS 10-20V...
-
Page 9: Technical Data
1.5 m/s Sound values according to EN 60745 Sound pressure level L 84 dB(A) Sound power L 95 dB(A) Uncertainty K 3 dB Wear hearing protection. Excessive noise can lead to hearing loss. Operating manual – cordless hammer drill PHDS 10-20V... -
Page 10: Transport And Storage
– Only ship batteries if their housing is undamaged. – Mask open terminals with tape and pack the battery in a way that it cannot move inside the packaging. – Please also observe any other national regulations. Operating manual – cordless hammer drill PHDS 10-20V... -
Page 11: Start-Up
LED in the battery level indication (4) is illuminated), the battery should be charged. To do so, please proceed as follows: 1. Slide the battery (8) onto the quick charger (9) upside down until it locks in place. Operating manual – cordless hammer drill PHDS 10-20V... - Page 12 Orange – Red medium charge / power weak charge – Recharge the battery. 1. Press the on / off switch (16). ð You can read the battery status from the battery level indication (4). Operating manual – cordless hammer drill PHDS 10-20V...
- Page 13 When unscrewing, note the setting of the rotational direction! On the clockwise / counter-clockwise rotation direction indicator (5) you can see in which direction the screws will be screwed. Do not use either (impact) drilling setting screwing! Operating manual – cordless hammer drill PHDS 10-20V...
- Page 14 Only use the gear selection when the device is at a standstill! Otherwise the device might be damaged. 1. Slide the gear selection (3) to the desired position. ð Speed level 1: Speed of up to 440 rpm, suitable for all screwing applications. Operating manual – cordless hammer drill PHDS 10-20V...
-
Page 15: Operation
• Use a wood drill bit with centring tip. For deep drill holes, use an auger bit; for large drilling diameters, use a Forstner bit. Operating manual – cordless hammer drill PHDS 10-20V... -
Page 16: Available Accessories
3. Remove the battery from the device (see Start-up chapter). 4. Remove the tool from the device (see Start-up chapter). 5. Clean the device according to the Maintenance chapter. 6. Store the device according to the Storage chapter. Operating manual – cordless hammer drill PHDS 10-20V... -
Page 17: Errors And Faults
Troubleshooting tasks which require the housing to be opened • Check whether the correct speed level is selected. For must only be carried out by a specialist dealer or by Trotec. drilling, you need to switch to the 2nd speed level. -
Page 18: Maintenance
• Keep the connecting terminals on the device, battery pack and charger clean. • Keep the ventilation openings free from dust deposits to prevent overheating of the motor. Operating manual – cordless hammer drill PHDS 10-20V... - Page 20 Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...