Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Trotec PHDS 10-230V
Summary of Contents for Trotec PHDS 10-230V
- Page 1 PHDS 10-230V OPERATING MANUAL IMPACT DRILL...
-
Page 2: Table Of Contents
Info Information marked with this symbol helps you to carry out your tasks quickly and safely. Follow the manual Information marked with this symbol indicates that the operating manual must be observed. Operating manual – Impact drill PHDS 10-230V... -
Page 3: Safety
Keep your hair, clothing and gloves away Water entering a power tool will increase the risk of from moving parts. Loose clothes, jewellery or long hair electric shock. can be caught in moving parts. Operating manual – Impact drill PHDS 10-230V... - Page 4 • Immediately switch off the power tool if the insertion tool gets jammed. The power tool can lash out to the side owing to the forces that build up consequently. Operating manual – Impact drill PHDS 10-230V...
- Page 5 Check the device for damages and proper functioning whilst adhering to the technical data (see operating manual). before each use. We recommend using the power tool with original Trotec If you notice damages, no longer use the device. accessories. Do not use the device when the device or your hands...
-
Page 6: Information About The Device
Notice If you store or transport the device improperly, the device may be damaged. Note the information regarding transport and storage of the device. Operating manual – Impact drill PHDS 10-230V... - Page 7 Drilling in metal with additional handle a 2.713 m/s Locking switch for continuous operation Uncertainty K 1.5 m/s Handle Depth stop Drill bits Additional handle Speed selection setting wheel for continuous operation On/off switch / speed selection Clockwise/counter-clockwise rotation switch Operating manual – Impact drill PHDS 10-230V...
-
Page 8: Transport And Storage
When the device is not being used, observe the following storage conditions: • dry and protected from frost and heat • ambient temperature below 40 °C • protected from dust and direct sunlight inside the transport case Operating manual – Impact drill PHDS 10-230V... -
Page 9: Start-Up
5. Tighten the screw connection of the additional handle (8) by rotating the gripping surface to the right. 6. Check the additional handle (8) for tight fit. If necessary, tighten the additional handle further. Operating manual – Impact drill PHDS 10-230V... - Page 10 1. Press and hold the spindle lock button (2). 2. Open the keyless drill chuck (1). 7. Tighten the keyless drill chuck (1). 8. Let go of the spindle lock button (2). 9. Make sure that the drill bit is attached securely. Operating manual – Impact drill PHDS 10-230V...
- Page 11 1. Insert the mains plug into a properly secured mains socket. 3. Adjust the depth stop to the desired length. 4. Tighten the screw connection of the additional handle (8) by rotating the gripping surface to the right. Operating manual – Impact drill PHDS 10-230V...
-
Page 12: Operation
• When using screwdriver bits, always use a universal bit holder. Only use screwdriver bits that are suitable for the 7. Let go of the on/off switch (10) to stop the device. screw head. Operating manual – Impact drill PHDS 10-230V... - Page 13 5. Let go of the on/off switch (10) to stop the device. 3. Let go of the on/off switch (10) and continue holding the device. ð The on/off switch is locked in place. ð The device keeps running and continuous operation is activated. Operating manual – Impact drill PHDS 10-230V...
- Page 14 Note that the speed is limited by the on/off switch, which can only be pressed down to the set speed. Selecting the operating mode The function selector switch (3) is used to select drilling or impact drilling operating mode. Operating manual – Impact drill PHDS 10-230V...
-
Page 15: Available Accessories
Rock drill bit set, 15-piece 6,200,001,151 Wood drill bit set, 15-piece 6,200,001,101 Metal drill bit set HSS, 15-piece 6,200,001,131 Screw bit set, 32-piece 6,200,001,001 2. Set the switch to L for rotation to the left. Operating manual – Impact drill PHDS 10-230V... -
Page 16: Errors And Faults
Only then switch the device back on. Your device still does not operate correctly after these checks? Please contact the customer service. If necessary, bring the device to an authorized specialist electrical company or to Trotec for repair. Operating manual – Impact drill PHDS 10-230V... -
Page 17: Disposal
Operating manual – Impact drill PHDS 10-230V... - Page 18 Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...