Note This signal word indicates important information (e.g. material damage), but does not indicate hazards. Info Information marked with this symbol helps you to carry out your tasks quickly and safely. Operating manual – cordless drill driver PSCS 10-12V...
No liability is accepted for damages resulting from improper use. In such a case, any warranty claims will be voided also. Operating manual – cordless drill driver PSCS 10-12V...
Page 4
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. Operating manual – cordless drill driver PSCS 10-12V...
Page 5
• Protect electrical parts against moisture. To prevent an electric shock, never immerse them in water or other liquids during cleaning or operation. Never hold the charger under running water. Please observe the instructions for cleaning and maintenance. Operating manual – cordless drill driver PSCS 10-12V...
Page 6
Do not use the device when the device or your hands Dangers can occur at the device when it is used by are damp or wet! untrained people in an unprofessional or improper way! Observe the personnel qualifications! Operating manual – cordless drill driver PSCS 10-12V...
Page 7
The device is not intended for drilling in concrete or natural stone. Personnel qualifications People who use this device must: • have read and understood the operating manual, especially the Safety chapter. Operating manual – cordless drill driver PSCS 10-12V...
Device depiction On / off switch (speed regulation) LED work lamp Scope of delivery 1x Cordless drill driver 1x Battery 2x Bits (50 mm) 1x Quick charger 1x Transport case 1x Manual Operating manual – cordless drill driver PSCS 10-12V...
Page 9
63.1 dB(A) Sound power level 74.1 dB(A) Uncertainty K 3 dB(A) Vibration information according to EN 60745 Vibration emission value drilling in 1.58 m/s metal / screwing ah=in Uncertainty K 1.5 m/s Operating manual – cordless drill driver PSCS 10-12V...
• Remove the battery from the device. • Do not store Li-ion batteries which are completely discharged. Storing discharged batteries can lead to a deep discharge and thus damage the battery. Operating manual – cordless drill driver PSCS 10-12V...
Page 11
Allow the battery (7) to cool down to room temperature. 5. Remove the battery (7) from the quick charger (8). 3. If required, charge the battery (7) as described in the section Charging the battery. Operating manual – cordless drill driver PSCS 10-12V...
Page 12
2. Turn the keyless drill chuck (1) counter-clockwise to open 5. Tighten the keyless drill chuck (1) by turning clockwise. 3. If necessary, take the (drill) bit out of the drill chuck. Operating manual – cordless drill driver PSCS 10-12V...
Page 13
When unscrewing, note the setting of the rotational direction! On the clockwise / counter-clockwise rotation direction indicator (5) you can see in which direction the screws will be screwed. Do not use the drilling setting for screwing! Operating manual – cordless drill driver PSCS 10-12V...
• For larger drilling diameters, use a smaller drill bit for pre- drilling. • To achieve ideal results, the drill bit should be cooled with a suitable lubricant. • Metal drill bits may also be used for drilling in plastic. Operating manual – cordless drill driver PSCS 10-12V...
3. Remove the battery from the device (see Start-up chapter). 4. Remove the tool from the device (see Start-up chapter). 5. Clean the device according to the Maintenance chapter. 6. Store the device according to the Storage chapter. Operating manual – cordless drill driver PSCS 10-12V...
Troubleshooting tasks which require the housing to be opened speed level (2nd speed level). must only be carried out by a specialist dealer or by Trotec. • Check whether the correct drill bit is selected. Slight smoke or odour are emitted during first use: •...
• Keep the connecting terminals on the device, battery pack and charger clean. • Keep the ventilation openings free from dust deposits to prevent overheating of the motor. Operating manual – cordless drill driver PSCS 10-12V...
Page 18
EU Declaration of Conformity In accordance with the EC Machinery Directive 2006/42/EC, Annex II, part 1, Section A Trotec GmbH & Co. KG Grebbener Straße 7 D-52525 Heinsberg Phone: +49 2452 962-400 Fax: +49 2452 962-200 E-mail: info@trotec.com declare in sole responsibility that the following device...
Page 20
Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...