Clear Random Access Memory (Ram) And Initialize Cash Register ⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅2; Load Paper ⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅2 - Samsung ER-150 Operation Manual

CLEAR RANDOM ACCESS MEMORY (RAM) AND
INITIALIZE CASH REGISTER
1. Place mode switch in P position.
2. Connect the AC plug into a power outlet while
pressing the "C" and "00" keys.
3. Then, RAM is cleared and cash register prints the
symbol "........".
NOTE : This is a one time only procedure to be
LOAD PAPER
1.Cut or tear the end of a single
paper tape evenly for proper
feeding through the print head.
2. Place paper roll in the paper
holder and insert the paper
end straight into the paper
inlet of the printer.
3. Depress the "FEED" key until the paper catches and
advances through the printer.
OFF R X
performed after the battery is installed.
DO NOT CLEAR RAM ONCE THE CASH
REGISTER IS PROGRAMMED. TO DO SO
WOULD CAUSE ALL PROGRAMS AND
TOTALS TO BE LOST.
Z P
2