Adjusting Your Monitor Image - Lenovo ThinkCentre TIO24Gen5Touch User Manual

Adjusting your monitor image

This section describes the user control features used to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1. Direct access controls
1
2
3
4
5
6
Icon Control
Left
UP
Input Source
Down
Menu
Right
Description
Return to the previous menu page or exit from the
previous function.
UP browsing key
For increasing the value on adjustment bar/tune in
It is a shortcut for changing input signal while there is no
OSD on the screen or on power-saving. Press and hold for
10 seconds to Enable/Disable the "DDC/CI" .
Down browsing key.
For decreasing the value on adjustment bar/tune in.
To access OSD menu.
Press to confirm selection.
Press and hold for 10 seconds will lock menu/un-lock
menu.
Press to enter next level on main menu/sub menu
status or enter previous level on adjustment bar.
Chapter 2.Adjusting and using your monitor 2-7