Selecting A Supported Display Mode - Lenovo ThinkCentre TIO24Gen5Touch User Manual

Selecting a supported display mode

The display mode of the monitor uses is controlled by the computer. Therefore, refer to your
computer documentation on how to change display modes.
The image size, position and shape might be changed when the display mode changes. This
is normal and the image can be re-adjusted using automatic image setup and the image
controls. Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD
or Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to reattach
the CRT monitor temporarily until you have re-configured the system; preferably to 1920 x
1080 at 60 Hz, which is a common display mode.
The display modes shown below have been optimized at the factory.
Note: According to the VESA standard, there may be a certain error (+/-1Hz) when
calculating the refresh rate (field frequency) of different operating systems and graphics
cards. In order to improve compatibility, the nominal refresh rate of this product has been
rounded off. Please refer to the actual product.
Table 2-3 Factory set display modes
Timing
640x350
640x480
640x480
640x480
640x480
720x400
800x600
800x600
800x600
1024x768
1024x768
1024x768
1280x1024
1280x1024
1280x1024
1366x768
1440x900
1440x900
1680x1050
1920x1080
1600x1200
1600x1200
1920x1080
2-15 Flat Panel Monitor User's Guide
Refresh rate(Hz)
70 Hz
60 Hz
66 Hz
72 Hz
75 Hz
70 Hz
60 Hz
72 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 Hz
72 Hz
75 Hz
60 Hz
60 Hz
75 Hz
60 Hz
60 Hz
60 Hz
70 Hz
75 Hz