Download Print this page

Eden 95144EDAMZ Quick Start Manual

Misting and revolving sprinklers with telescoping tripod

Advertisement

Quick Links

Tripod
length
70"
(179cm)
Step 1
Place the tripod in the area
where you want to water.
Push down on the tripod legs
until the spikes are well
seated in the ground.
(Follow the yellow warning
sign on the tripod to avoid
pinching your thumb)
Step 2
Simply attach the sprinkler head to
the top of the Tripod (do not overtighen).
Step 3
Using the Quick Connect with Shut O
without having to return to the faucet – saving time and water. Attach the lockable Quick Connect to
the end of the hose, then snap the hose to the tripod to begin using.
31.8"
(81cm)
Note: If you are not using
the Quick Connect System,
simply connect the sprinkler
directly to the hose.
Quick Connect Starter Set
with Shut O
Valve ts
standard garden hoses and
watering tools
MISTING AND REVOLVING SPRINKLERS WITH
Features & Bene ts
• Misting head features 360-degree horizontal angle adjustments, 200 degree
vertical angle adjustments to water in any direction
• Easy to move and place anywhere in the yard
• No tools required to assemble! Hand tighten only
• 15 spray nozzles provide a dancing fountain watering e ect
• Tripod adjusts from 31 inches to 70 inches (81 cm to 179 cm) for watering tall plants
• Great for cooling patios, balconies, and outdoor areas for relief during the summer
heat, cooling mist refreshes hanging plants, potted plants, vases, herbs, and more
TELESCOPING TRIPOD
Valve allows you to easily shut o
95144EDAMZ
the water and swap tools

Advertisement

loading

Summary of Contents for Eden 95144EDAMZ

  • Page 1 95144EDAMZ MISTING AND REVOLVING SPRINKLERS WITH Tripod TELESCOPING TRIPOD length 70” (179cm) Step 1 Place the tripod in the area where you want to water. Push down on the tripod legs until the spikes are well seated in the ground.
  • Page 2 95144EDAMZ 200° 5 soft spray misting nozzles Cleaning and Maintenance: If you are not using a water lter and the Misting Tower has low water pressure, you may need to clean the misting nozzles. To clean, simply use your hand to unscrew 360°...