Safety Alert Messages-Unsafe Conditions; Damage And Malfunction Hazards; Hazards Resulting From Inoperative Safety Devices - Milnor MWF63C Series Maintenance Manual

WARNING: Explosion and Fire Hazards — Flammable substances can explode or
your local fire department/public safety office and all insurance providers.
2.1.3 Safety Alert Messages—Unsafe Conditions
2.1.3.1

Damage and Malfunction Hazards

2.1.3.1.1

Hazards Resulting from Inoperative Safety Devices

DANGER:
WARNING: Multiple Hazards — Operating the machine with an inoperative safety
age property, and/or void the warranty.
Do not tamper with or disable any safety device or operate the machine with a mal-
�
functioning safety device. Request authorized service.
WARNING: Electrocution and Electrical Burn Hazards — Electric box doors—Op-
WARNING: Entangle and Crush Hazards — Guards, covers, and panels—Operating
WARNING: Crush Hazards — Down limit switches (machines with front and rear tilt
seated tilt wheels on a tilted machine to lift from their cradles. The housing will fall and
lunge forward or rearward.
Pellerin Milnor Corporation
ignite in the cylinder, drain trough, or sewer. The machine is designed for
washing with water, not any other solvent. Processing can cause solvent-
containing goods to give off flammable vapors.
Do not use flammable solvents in processing.
�
Do not process goods containing flammable substances. Consult with
�
Entangle and Sever Hazards — Cylinder door interlock—Operating the
machine with a malfunctioning door interlock can permit opening the door
when the cylinder is turning and/or starting the cycle with the door open,
exposing the turning cylinder.
Do not operate the machine with any evidence of damage or
�
malfunction.
device can kill or injure personnel, damage or destroy the machine, dam-
erating the machine with any electric box door unlocked can expose high
voltage conductors inside the box.
Do not unlock or open electric box doors.
�
the machine with any guard, cover, or panel removed exposes moving
components.
Do not remove guards, covers, or panels.
�
cylinders)—Failure of both front or both rear limit switches allows the
BNWHTS04.C01 0000235024 A.5 A.2 1/2/20 2:19 PM Released
BNWHTS04.C02 0000235048 A.5 A.2 1/2/20 2:19 PM Released
BNWHTS04.C03 0000235047 A.5 A.2 A.3 1/2/20 2:19 PM Released
Safety
7