Safety; Tilting Washer Extractors; Safety Alert Messages-Internal Electrical And Mechanical Hazards - Milnor MWF63C Series Maintenance Manual

2 Safety

BNWHTS08 / 2021243
2.1

Tilting Washer Extractors

2.1.1 Safety Alert Messages—Internal Electrical and
Mechanical Hazards
The following are instructions about hazards inside the machine and in electrical enclosures.
WARNING: Electrocution and Electrical Burn Hazards — Contact with electric
Keep yourself and others off of machine.
�
Know the location of the main machine disconnect and use it in an emergency to re-
�
move all electric power from the machine.
WARNING: Entangle and Crush Hazards — Contact with moving components nor-
Know the location of all emergency stop switches, pull cords, and/or kick plates and
�
use them in an emergency to stop machine motion.
WARNING: Crush Hazards — Tilting machines only—The machine housing will
Do not reach into the machine housing or frame.
�
Pellerin Milnor Corporation
power can kill or seriously injure you. Electric power is present inside the
cabinetry unless the main machine power disconnect is off.
Do not unlock or open electric box doors.
�
Do not remove guards, covers, or panels.
�
Do not reach into the machine housing or frame.
�
mally isolated by guards, covers, and panels, can entangle and crush your
limbs. These components move automatically.
Do not remove guards, covers, or panels.
�
Do not reach into the machine housing or frame.
�
Keep yourself and others off of machine.
�
crush your body or limbs if it descends or falls while you are under it.
Housing can descend with power off or on. Manual operation of tilting
valves overrides safety interlocks. Improper operation of manual tilting
valves may cause the housing to descend.
Do not remove guards, covers, or panels.
�
BNWHTS08 0000349892 A.2
BNWHTS08.C01 0000349891 A.5 A.2 6/8/21 3:00 PM Released
BNWHTS01.C03 0000235031 A.5 A.2 B.1 1/20/20 12:08 PM Released
6/8/21 3:00 PM Released
5