Advertisement
BEFORE FIRST USE
Install remote control batteries
1.
Remove the screw on the battery cover and open the battery cover.
2.
Noting the polarity markings (+/–), insert x3 AA (non-rechargeable) batteries into
the remote control.
3.
Reattach the battery cover.
Notes:
• Do not mix old and new batteries together.
• Do not mix different types of batteries.
Charge the battery
1.
Remove the battery from the underside of the drone.
2.
Connect the USB charging cable to the charging port on the battery and a USB
power adapter (not supplied). Plug the power adapter into an electrical outlet.
3.
During charging the indicator is RED. Once fully charged the indicator will turn
GREEN.
8
Advertisement
