Advertisement
Headless mode
By default, the flight controls of the drone are based on the position of the nose of the drone
at any given time. For beginners, this may make the drone difficult to control if the drone
changes its orientation.
Activating headless mode allows easier control of the drone as it will move according to the
joystick controls regardless of where the nose is facing.
1.
Place drone directly in front of you (the side with the camera is facing forward),
align the remote control to the rear of the drone and then the press take-off
/landing button. The drone will rise into the air.
2.
Press the headless mode button. The remote control will beep twice to confirm.
3.
To exit headless mode, press the headless mode button again. The remote control
will beep once to confirm.
16
1 1
2
Advertisement
