Mitsubishi Electric Lossnay LGH-15RVX3-E Operating Instructions Manual page 6

4.3 Assembly after maintenance
Bearing in mind the following points, assemble the parts following the
sequence for their removal in reverse. Check the fix piece does not
slide off the hinge wire by the black screw.
Hinge wire
Black screw
Fix piece
• Arrange the Lossnay core with the air filter side downward. When
the unit is installed upside down, air filters are positioned upper
Lossnay cores.
• The filter has front and back side. Set the arrow mark on the filters
as the air flow direction.
Note
are indicated on the remote controller, turn off the
• If
indication, after maintenance.
4.4 Additional precautions for vertical
installation
• When unit is installed vertically, follow below instructions. For
items not described in this section, follow the instructions in other
sections.
• Do not touch the unit where it is not related with the maintenance
work.
• Do not place anything on the unit.
• Do not lean on, or put your weight on the product. There is a risk of
product deformation or injury.
• When inserting or removing Lossnay cores, securely hold the
handle until the end and insert or remove them one by one.
Otherwise, some parts might be damaged.
Maintenance cover
Eng-6
2303N22HHZA0012