Advertisement
Installation of Water Inlet Hose on Body Side
Caution:
Serious water leaks may occur if the water inlet hose is installed improperly.
1
Connect to the body
1. As illustrated, insert the O-ring side of the
water inlet hose straight into the body
connection port.
(If not inserted straight, the O-ring may
be damaged.)
Note
Make sure to use the water
inlet hose supplied with the
product.
(Risk of water leak)
2. As illustrated, insert the quick fastener
all the way into the connection correctly
until a "click" is heard.
A
Connection
3. Tighten the claw securely.
Bend the hole end downwards.
Bend the claw end towards the hole end
and tighten it. (Until a "click" is heard)
Bend
Hold end
4. With the water inlet hose held in your hands,
turn the quick fastener gently. The turning
operation should be smooth. (If it is not
smooth, it indicates the installation is
done improperly.)
8
Insert
Bend
Tighten
Claw end
Body
connection
port
Caution
An O-ring must be fitted to the
front end.
The O-ring must be free of dust.
(Risk of water leak)
Quick fastener
Note
When the claw can't be fit, it
indicates that the connection isn't
inserted all the way in.
Make sure the insert and tighten
the quick fastener securely.
Example of incorrect connection
* If the claw is not tightened securely,
the quick fastener will become
loosened, resulting in a serious water
leak.
Claw not
tightened
Turn to a easily
visible position
and fit the claw.
Caution
Do not damage (cut or scratch)
the water inlet hose.
(Risk of water leak)
Turn gently
Water inlet hose
About the O-ring
O-ring
About the
quick fastener
Advertisement
