Advertisement
Cautions Before Installation
Note
Do not plug the power plug before the bidet body is installed completely. Otherwise, a malfunction may
be incurred.
When the water remaining inside the body is frozen, move the body to a warm place. Perform installation
after the frozen water is thawed out.
Make sure to use the supplied water inlet hose. Otherwise, a water leak may be incurred.
Tips
As the product has undergone the water passage test, a small amount of water remaining inside may flow out.
This is not a malfunction.
The operating range of water pressure is 49 - 735 kPa｛0.5 - 7.5 kgf/cm
2
｝.
Shaking may sometimes result from seat mounts not contacting with the surface of the toilet depending on
toilet types.
Required Tools
Tape measure
Phillips screwdriver
Adjustable wrench
Bucket and rag
3
Advertisement
