Hama Window Thermometer - Operating Manual

Controls and displays

1. Display
2. Suction cup
3. Battery compartment

Package Contents

• Indoor/outdoor window thermometer
• 1 x LR1130 button cell battery
• These operating instructions

Getting started

• Open the battery compartment (3) on the back of the thermometer.
• Remove the protective film from the button cell.
• When inserting the battery, ensure that the polarity is correct (+ to the top, - to the bottom).
• Close the battery compartment. Make sure that the cover closes easily and tightly.
• The thermometer is automatically activated.

Operation

• The current temperature is shown on the display (1) after activation of the thermometer.
• Use the suction cup (2) to attach the thermometer to a smooth surface such as a window pane.
• The thermometer can be fitted both indoors and on the outside of buildings.
• Make sure that the suction cup (2) and the surface to which it is to adhere are clean and free of dust and grease.
• If you would like to remove the thermometer, simply lift the edge of the suction cup (2).

Note – Attaching the product outdoors

• Remove the suction cup (2) on the back of the thermometer.
• Attach the suction cup to the front of the thermometer. The displayed temperature can now be read from inside.
• The international standard height for measuring air temperature is 1.23 m (4 ft) above ground.

Replacing the batteries

• If the display (1) becomes dimmer, you must replace the battery.
• Replace the battery as described in 5. Getting started.

Care and Maintenance

• Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
• Make sure that water does not get into the product.

Service & Support
www.hama.com
+49 9091 502-0

Hama GmbH & Co KG
86652 Monheim/Germany